Recommended Products
-
[Structure and composition]: This product is composed of mask body (including nose clip) and mask belt. The product should be sterile. After ethylene oxide sterilization, the residual amount of ethylene oxide should not exceed 10μg/g. One-time use.
[Scope of application]: It is suitable for filtering particulates in the air and blocking droplets, blood, body fluids, secretions, etc. in a medical working environment.
[Usage method]:
1. Choose the appropriate specifications according to the clinical needs;
2. Open the package from the opening;
3. Press tightly along both sides of the bridge of the nose to make the mask close to the face. The upward wrinkle surface (light-colored surface) is the skin contact surface; it covers the user’s mouth, nose and jaw;
4. Perform a tightness check.Medical protective mask0.00[Structure and composition]: This product is composed of mask body (including nose clip) and mask belt. The product should be sterile. After ethylene oxide sterilization, the residual amount of ethylene oxide should not exceed 10μg/g. One-time use.
[Scope of application]: It is suitable for filtering particulates in the air and blocking droplets, blood, body fluids, secretions, etc. in a medical working environment.
[Usage method]:
1. Choose the appropriate specifications according to the clinical needs;
2. Open the package from the opening;
3. Press tightly along both sides of the bridge of the nose to make the mask close to the face. The upward wrinkle surface (light-colored surface) is the skin contact surface; it covers the user’s mouth, nose and jaw;
4. Perform a tightness check. -
[Structure and composition]: This product is made of non-woven fabric and high efficiency filter paper.
[Scope of application]: The sterile type is for clinical medical staff to wear during invasive operations (the non-sterile type is for clinical medical staff to wear during non-invasive operations), covering the user’s mouth, nose and jaw. Provide a physical barrier to prevent the direct penetration of pathogenic microorganisms, body fluids, and particles.
[Usage method]:
1. Choose the appropriate specifications according to the clinical needs;
2. Open the package from the opening;
3. Take out the product with the nose clip on the top and the folds upward The face (light-colored face) is the skin-contact face. Press the nose bridge clamp tightly along both sides of the nose bridge to make the mask close to the face; covering the user's mouth, nose and jaw.Medical surgical mask0.00[Structure and composition]: This product is made of non-woven fabric and high efficiency filter paper.
[Scope of application]: The sterile type is for clinical medical staff to wear during invasive operations (the non-sterile type is for clinical medical staff to wear during non-invasive operations), covering the user’s mouth, nose and jaw. Provide a physical barrier to prevent the direct penetration of pathogenic microorganisms, body fluids, and particles.
[Usage method]:
1. Choose the appropriate specifications according to the clinical needs;
2. Open the package from the opening;
3. Take out the product with the nose clip on the top and the folds upward The face (light-colored face) is the skin-contact face. Press the nose bridge clamp tightly along both sides of the nose bridge to make the mask close to the face; covering the user's mouth, nose and jaw. -
[Structure and composition]: This product is made of non-woven fabric or film-coated non-woven fabric composite material with certain protective characteristics by hot pressing or sewing. It is composed of collar, body, sleeves and ties. The product should be sterile. After sterilization with ethylene oxide, the residual amount of ethylene oxide should not exceed 10mg/kg. One-time use.
[Scope of application]: It is worn by the surgical staff to reduce the spread of infection source to the patient's surgical wound to prevent postoperative wound infection.
[Usage method]:
1, select the appropriate specifications according to clinical needs;
2, open the package from the opening;
3, take out this product to distinguish the upper and lower sides of the surgical gown, and use Lift the two corners of the collar with both hands to fully shake off the surgical gown, gently throw the surgical gown upwards, stretch your arms into the cuffs, stretch your hands forward, avoid touching people or things around you, and then let the nurse assist in wearing it.Disposable surgical gown0.00[Structure and composition]: This product is made of non-woven fabric or film-coated non-woven fabric composite material with certain protective characteristics by hot pressing or sewing. It is composed of collar, body, sleeves and ties. The product should be sterile. After sterilization with ethylene oxide, the residual amount of ethylene oxide should not exceed 10mg/kg. One-time use.
[Scope of application]: It is worn by the surgical staff to reduce the spread of infection source to the patient's surgical wound to prevent postoperative wound infection.
[Usage method]:
1, select the appropriate specifications according to clinical needs;
2, open the package from the opening;
3, take out this product to distinguish the upper and lower sides of the surgical gown, and use Lift the two corners of the collar with both hands to fully shake off the surgical gown, gently throw the surgical gown upwards, stretch your arms into the cuffs, stretch your hands forward, avoid touching people or things around you, and then let the nurse assist in wearing it. -
[Structure and composition]: This product is made of thin adhesive nonwoven fabric or thin nonwoven fabric for hygiene. The product should be sterile. After sterilization with ethylene oxide, the residual amount of ethylene oxide should not exceed 10mg/kg. One-time use.
[Scope of application]: Used to prevent cross-infection between doctors and patients.
[Usage method]:
1, select the appropriate specifications according to clinical needs;
2, open the package from the opening;
3, take out the product and wear all the hair into the hat Inside, the closed ends of the foldable strip cap must be placed on both ears;
4. This product can be used without training.Medical cap0.00[Structure and composition]: This product is made of thin adhesive nonwoven fabric or thin nonwoven fabric for hygiene. The product should be sterile. After sterilization with ethylene oxide, the residual amount of ethylene oxide should not exceed 10mg/kg. One-time use.
[Scope of application]: Used to prevent cross-infection between doctors and patients.
[Usage method]:
1, select the appropriate specifications according to clinical needs;
2, open the package from the opening;
3, take out the product and wear all the hair into the hat Inside, the closed ends of the foldable strip cap must be placed on both ears;
4. This product can be used without training. -
[Structure and composition]: This product is made of non-woven fabric or gauze, and the product should be sterile. After ethylene oxide sterilization, the residual amount of ethylene oxide should not exceed 10μg/g. One-time use.
[Scope of application]: It is worn by clinical medical staff during invasive operations, covering the mouth, nose and jaw of the user, and providing a physical barrier to prevent the direct penetration of pathogenic microorganisms, body fluids, and particles.
[Usage method]:
1. Choose the appropriate specifications according to the clinical needs;
2. Open the package from the opening;
3. Take out the product with the nose clip on the top and the folds upward The face (light-colored face) is the skin-contact face. Press the nose bridge clamp tightly along both sides of the nose bridge to make the mask close to the face; covering the user's mouth, nose and jaw.Medical masks0.00[Structure and composition]: This product is made of non-woven fabric or gauze, and the product should be sterile. After ethylene oxide sterilization, the residual amount of ethylene oxide should not exceed 10μg/g. One-time use.
[Scope of application]: It is worn by clinical medical staff during invasive operations, covering the mouth, nose and jaw of the user, and providing a physical barrier to prevent the direct penetration of pathogenic microorganisms, body fluids, and particles.
[Usage method]:
1. Choose the appropriate specifications according to the clinical needs;
2. Open the package from the opening;
3. Take out the product with the nose clip on the top and the folds upward The face (light-colored face) is the skin-contact face. Press the nose bridge clamp tightly along both sides of the nose bridge to make the mask close to the face; covering the user's mouth, nose and jaw. -
-
[Specifications/Models]: large, medium and small
[Structure and composition]: This product is made of medical polymer materials.
[Scope of application]: Used for gynecological examination.
[Usage method]: 1. Choose the appropriate specifications according to the clinical needs; 2. Open the package from the opening; 3. Take out the product to close the upper and lower lobes of the vaginal dilator, gently send it into the vagina, open the dilator to adjust The gear is checked.
Sterile vaginal dilator for single use0.00[Specifications/Models]: large, medium and small
[Structure and composition]: This product is made of medical polymer materials.
[Scope of application]: Used for gynecological examination.
[Usage method]: 1. Choose the appropriate specifications according to the clinical needs; 2. Open the package from the opening; 3. Take out the product to close the upper and lower lobes of the vaginal dilator, gently send it into the vagina, open the dilator to adjust The gear is checked.
-
[Structure and composition]: This product is made of natural rubber latex. The product should be sterile. After ethylene oxide sterilization, the residual amount of ethylene oxide should not exceed 10μg/g. One-time use.
[Scope of application]: Prevent cross-infection between patients and users.
[Usage method]:
1. Choose the appropriate specifications according to clinical needs;
2. Open the package from the opening;
3. Dry your hands when taking out the product and put it on ;
4. This product can be used without training.Disposable medical rubber examination gloves0.00[Structure and composition]: This product is made of natural rubber latex. The product should be sterile. After ethylene oxide sterilization, the residual amount of ethylene oxide should not exceed 10μg/g. One-time use.
[Scope of application]: Prevent cross-infection between patients and users.
[Usage method]:
1. Choose the appropriate specifications according to clinical needs;
2. Open the package from the opening;
3. Dry your hands when taking out the product and put it on ;
4. This product can be used without training.
About Us
Xinxiang Kangmin Hygienic Materials Development CO.,LTD.
Xinxiang Kangmin Hygienic Materials Development CO.,LTD,Established in the Central Plains of China, with convenient transportation. Kangmin Group is an innovative enterprise specializing in the production and development of medical consumables. Kangmin Group was established in 1998 and covers an area of 46,000 square meters. The company currently has more than 200 advanced production equipment (sets), with a degree of mechanization accounting for more than 90%.Strong production capacity is the embodiment of strength and delivery speed.Kangmin Group's existing main products include non-woven fabric series, polymer series, medical auxiliary bag series, protection and nursing series, cotton yarn series, cotton swabs, cotton ball series, glove series, compressed towels and other products.
Products
Committed to the production of medical equipment
and medical sanitary materials for 20 years
-
20
+Focus on medical devices
-
200
+Production Equipment
-
46000
+Area
Company Philosophy
Establish corporate image
The company takes "Health and Health for the people's health" as its mission and makes unremitting efforts. The company organizes production in strict accordance with
Continuously create market demand
Kangmin Eisai ensures that the quality of its products meets the requirements of national and industrial standards. Has won the general trust of users. We provide high-quality
Exquisite craftsmanship
The company currently has more than 200 advanced production equipment (sets), with a degree of mechanization accounting for more than 90%, ensuring the company's
News
Our company has obtained TUV Rheinland CE certificate
2021-01-27
Changyuan City Federation of Trade Unions awarded our company (Kangmin Eisai) the "Model Home of Workers" and the four-star "Grassroots Vigor Union"
2020-07-30
500 million anti-allergic drugs welcome reviewers again 4.9 billion market only 3 varieties have been reviewed
2019-04-13
Copyright ©Xinxiang Kangmin Hygienic Materials Development CO.,LTD. 豫ICP备16017456号 Powered by: www.300.cn