
Disposable sterile catheterization kit
[Scope of application]: Applicable to clinical catheterization in medical institutions.
[How to use]:
1. Choose appropriate specifications and configurations according to clinical needs;
2. Open the package from the opening and wear gloves;
3. Take out the components of this product and check whether the components in the package are intact and accurate according to the configuration table (see the outer package for details);
4. Disinfect the urethral opening, hold the urinary catheter with tweezers, lubricate the urinary catheter and slowly insert it into the bladder, fix the urinary catheter and then perform catheterization;
5. The catheter should be inserted gently to avoid damage to the urethral mucosa and avoid repeated twitching of the catheter;
6. Strict aseptic operation during use, only sterile water can be injected into the airbag, and the amount of water injected must not exceed the marked capacity;
7. The patient's acute weakness and overfilling of the bladder, urination should be slow, and the first urination volume should not exceed 1000ml to avoid bleeding or syncope caused by sudden bladder decompression.
[Structure and composition]: This product consists of basic configuration disposable urinary catheter and optional configuration disposable drainage bag, disposable surgical hole towel, disposable treatment towel, degreasing gauze block, tweezers, disposable medical Rubber examination gloves, disposable sterile rubber surgical gloves, disposable polyethylene examination gloves, disposable sterile dispensing syringes, iodophor cotton balls, silicone oil cotton balls, absorbent cotton balls, skin preparation knives, sponge brushes, pins, Test tube, catheter clamp, guide wire, talcum powder, bedside card, tray, wrapping cloth. The product should be sterile. After ethylene oxide sterilization, the residual amount of ethylene oxide should not exceed 10μg/g. One-time use.
[Scope of application]: Applicable to clinical catheterization in medical institutions.
[Usage method]: 1. Choose the appropriate specifications and configuration according to clinical needs; 2. Open the package from the opening and wear gloves; 3. Take out the components of this product and check the components in the package according to the configuration table (see the outer package for details) Whether it is intact or not, the number is accurate; 4. Disinfect the urethral orifice, hold the urinary catheter with tweezers, lubricate the urinary catheter and slowly insert it into the bladder, fix the urinary catheter and perform catheterization; 5. Insert the urinary catheter gently Avoid damaging the urethral mucosa and avoid repeated twitching of the urinary catheter; 6. Use strict aseptic operation. Only sterile water can be injected into the airbag, and the amount of water should not exceed the marked capacity; 7. The patient is eagerly weak and the bladder is overfilled, and urination Should be slow, and the first urination volume should not exceed 1000ml to avoid bleeding or syncope caused by sudden bladder decompression.
CONTACT INFORMATION
Tel:+86-373-8968888
E-mail:kangminwc@163.com(Headquarters)
info@xxkmwc.com (International Division)
ONLINE MESSAGE
Copyright ©Xinxiang Kangmin Hygienic Materials Development CO.,LTD. 豫ICP备16017456号 Powered by: www.300.cn