Heat and Moisture Exchanger Product Show


Release time:

2021-12-27

[structure and composition]: the product is mainly composed of machine end, patient end, electrostatic cotton, corrugated wet paper. [scope of application]: this device is applicable to the use of anesthesia machine and ventilator and artificial respirator surgery patients.

1. heat and moisture exchanger

 

 

 

Product Introduction

[structure and composition]: the product is mainly composed of machine end, patient end, electrostatic cotton, corrugated wet paper.

[scope of application]: this device is applicable to the use of anesthesia machine and ventilator and artificial respirator surgery patients.

[method of use]]:

1. Select appropriate specifications according to clinical needs;

2. Before use, check whether the product is in good condition. If it is damaged, it is forbidden to use it. 3. Connect the patient end of this product with ventilation equipment, and connect the other end with breathing pipeline, as close to the patient as possible;

4, only for professional use, use in strict accordance with the requirements of aseptic operation;

5. In case of abnormality, check whether the heat and humidity exchanger is unobstructed, and replace it in time when it is blocked, or deal with it according to the emergency plan formulated by the hospital according to the patient's condition.

[Contraindications]: 1. Patients with a large amount of foam or viscous secretions, dehydration, hemoptysis or respiratory tract injury are prohibited; 2. For patients with severe pulmonary insufficiency and other intolerable pathway resistance, it is prohibited; 3. People who are allergic to this product material are prohibited.

 

2. pediatric type

 

 

 

Comparison of 3. pediatric type and adult type

 

 

 

4. gas cutting type

 

 

 

5. Adult Type, Pediatric Type and Air Cut Type Comparison Chart

 

 

 

6. packaging display